![](assets/images/f/Kettenplattenreiniger_DE_650x457-6d6031fe.jpg)
Edge Processing in
Finish Quality
Machine infeed
Arrangement spraying systems
Pre-milling unit
Release agent spraying system
Prior to the pre-milling an ultra-thin coat of the Release Agent LPZ/II® is applied to the upper and lower edge area of the workpiece by means of an electronically controlled release agent spraying system. This prevents emerging glue from adhering to the workpiece.
Release Agent LPZ/II
Area of application: Prior to the pre-milling
Release Agent LPZ/II Application of the special release agent prevents emerging glue residue from adhering to the workpiece.
Consumption per fine nozzle: <1 litre for 5,000 running meters.
Pressure zone
Arrangement spraying systems
Pressure zone
Release agent spraying system for pressure roller
The fine nozzle of this electronically controlled unit applies a special Release Agent NFLY® to the contact pressure roller. The adjustable timed operation, i.e. 3 sec. spray duration, prevents glue from adhering to the contact pressure rollers.
Result: A notably enhanced quality. Contact pressure rollers need not be cleaned.
Release Agent NFLY | Release Agent LP120/12
Area of application: Pressure roller
Release Agent NFLY® | Intermittent application to the pressure roller. Glue residues cannot adhere to the roller.
Release Agent LP120/12 | Intermittent application to the pressure roller. Use within high heat zones possible. Contamination of the rollers is prevented.
Post processing
Arrangement spraying systems
Post processing
Antistatic coolant spraying system
The perfect addition to the release agent spraying unit fitted at the machine infeed and the cleaning agent spraying unit fitted at the end of the machine is the antistatic coolant unit shown in the adjacent photograph. It can be fitted downstream of the last contact pressure roller, upstream of the cross cut saws or upstream of the radius milling stations.
To cool the glue joint and statically discharge the edging material (necessary for PUR)
Antistatic Coolant LP289/99 | Coolant WZG12
Area of application: After pressure zone
Antistatic Coolant LP289/99 | The edgebanding material is statically discharged by the application of the antistatic coolant, and the glue-joint cooled at the same time. Tracer rollers and workpieces remain free from milling chips. The glue cures. Glue build-up on the tools is considerably reduced. Consumption per fine nozzle: <1 litre for 5,000 running meters.
Arrangement spraying systems
Post processing
Release agent spraying system for edge material moistening
The antistatic cooling spraying unit can be equipped with an additional fine nozzle. This nozzle is used to apply special Release Agent NFLY®‚ laterally to the edging material surface, which helps avoid damage to the sensitive edging material (Acryl/Aluminum) caused by detection shoes.
Furthermore protective film is protected and not removed from the edge.
Release Agent NFLY
Area of application: Edgeband/Protective foil
Release Agent NFLY | The release agent is sprayed directly onto the surface of the edgeband. This application avoids marking and damage of the edgeband. Furthermore protective film is protected and not removed from the edge.
Arrangement spraying systems
Post processing
Cleaning agent spraying system
This system is used to spray the Cleaning Agent LP163/93® on the top and bottom surface of the board edge, as well as the edgeband. The release agent applied at the machine infeed side and the loose glue residue are removed by the application of the cleaning agent and subsequent buffing.
Furthermore, the glue joint and the edgebanding are cooled.
Cleaning Agent LP163/93
Area of application: In front of the buffing wheels / flat scraper
Cleaning Agent LP163/93 | The cleaning agent is applied directly onto the upper and lower edge area of the workpiece. Release agent and loose glue residue are removed. Additionally the edgeband and glue joint is cooled down.
Leading machine manufacturers recommend and work with the original RIEPE products
Proven Quality!
Made in Germany
Products
Riepe®
Service as a holistic solution
Service
Service means Satisfaction
Quality Guarantee
Our products enhance competitiveness
· 100% Quality Control by experienced staff
Company
Valuable information about RIEPE®
News
Original RIEPE® products available in more than 60 countries
Global customer proximity
Edge processing to Finish Quality
Address
Theodor-Rosenbaum-Str. 28-30
32257 Bünde
Phone: +49 (0) 52 23 / 68 74 07-0
Fax: +49 (0) 52 23 / 68 74 07-50
Looking for a RIEPE® distributor?
Presence worldwide
Please contact us for more details.
Phone: +49 (0) 52 23 / 68 74 07-0
Fax: +49 (0) 52 23 / 68 74 07-50